FSG113 - Flame
Safeguard
Here is a chance to become more familiar with FSG Equipment and
Systems
Proper controls selection
Installation and system check
out
Systematic field service
Hands on experience with Honeywell RA890,
R4795, BC7000, RM7800 and their accessories. Control replacement, upgrading
and modernization will be featured.
You and your company stand to gain in at least five important ways:
Greater control and system application.
Quicker and more effective service.
Fewer in-warranty returns of non-defective equipment.
Increased overall customer satisfaction and employee responsibility.
Familiarization with state-of-the-art FSG controls.
Our program consists of an extensive two-day session with approximately one
half the time in classroom training and the other half with actual hands
on working with FSG controls. A Honeywell FSG Controls Textbook is included
in the program plus all pertinent technical literature. Lunches are included
as well as morning and afternoon refreshments.
Prerequisites: None Course Length: 16 hours
Tuition: $425.00 per student
Register
CSD-1 - Regulation Training
For the latest regulations and changes in CSD-1, this is the class
to attend.
Did you know that all commercial sights are required to have a
boiler/pressure vessel-operating certificate in the state of Maryland?
Did you know you are required to notify the Department of Labor,
Licensing, and Regulation Safety Inspection Unit 30 days before you install
a boiler or pressure vessel at a commercial site?
A qualified instructor will teach the class and there will be a
representative from the Maryland State Boiler Inspector's office to answer
any questions. To learn more, sign up today. Fee for class is $95.00, which
will include certificates and manuals. Morning coffee and pastries will be
provided.
Prerequisites: None Course Length: 4 hours
Tuition: $95.00 per student
Register
CNTL101 - Control Theory and
Fundamentals
This is an introductory course into the world of HVAC controls. The
student will develop an understanding of basic HVAC control principles,
terms, and fundamentals.
Topics included are:
Terms and definitions
HVAC system characteristics
Control systems characteristics
Control methods
Control types (two position, floating, proportional)
Reset control (compensation)
Prerequisites: None Course Length: 8 hours Tuition: $200.00
per student
No Training Scheduled
JCI VFD - Johnson Variable Frequency Drive Commissioner Certification
The VS-Training course provides factory authorized certification of
personnel responsible for commissioning the JCI VSD Series product line. The
first half of the instruction provides a high level of technical detail
related to the set-up and operation of the VSD Series drive. The second half
of the instruction provides technical detail on how to diagnose and repair.
VFD's in general. Certified startup extends the VFD warranty one additional
year no charge.
Upon completion of this training, participants are certified in:
Equipment Installation, Wiring and
Start-Up
Drive Application Review
Parameter Configuration and Quick Start
Wizard for HVAC
VFD Troubleshooting and Repair
Course cost includes lunch and all course materials.
Prerequisites: None Course Length: 20 hours
Tuition: $995.00 per student
Register
MET111 - Johnson Controls Metasys ASC Controller
This course is intended for contractors who currently use or are
interested in designing, installing and programming direct digital controls
using Johnson Controls ASC (Application Specific Controllers). This does not
include the use of network supervisory controllers.
Outline:
Controller Hardware
Create database using HVACPRO software
General wiring practices
Downloading and commissioning of
controllers
Methods of Communications
Review of N30 Supervisory control
Prerequisites: Good understanding of HVAC control applications and
general knowledge on the operation of windows based programs
Course Length: 8 hours Tuition: $425.00 per student
Register
WIN101 - Using Windows effectively for
HVAC Technicians
This course is designed for the HVAC technician who is starting to
use a computer to interface, download, program and commission today's
microprocessor based DDC controls.
Topics include:
Operating systems
File systems
Navigation
Shortcuts
Prerequisites: This is a beginner level class. It is recommended
that students have basic keyboard and mouse skills
Course Length: 4 hours Tuition: $95.00 per student
Register
NET201 - Networking for Building Automation Systems
This course is an introduction to the basic concepts of data and
computer communications necessary to build network infrastructure for
today's Building Automation Systems.
Topics covered are:
Network protocol overview
Client-Server application
Internet protocol and addressing
TCP/IP Communications switching and
routing
Data transmission
Transmission media
Prerequisites: WIN101 or two years PC experience Course
Length: 4 hours Tuition: $95.00 per student
Register
PNEU201 - Schneider Electric Pneumatic
Controls
This class will be hands on, teaching the basic skills needed to
service pneumatic control systems.
Students will learn:
Basic Air Supply Requirements
Valves and Damper Operation
Thermostat Operation and Calibration
Receiver-controller Calibration and Setup
Relay and Auxiliary Devices
Prerequisites: None Course Length: 16 hours
Tuition: $425.00 per student
Register
LCBS - Honeywell Light Commercial Building Solution
We are pleased to
announce the arrival of field training for the LCBS product offering. If
you or someone on your staff is working with these products, this class is a
must. The class is designed to be an introductory course to the LCBS system
hardware and software components. There will be in-depth study and hands-on
programming of the:
T7350 Commercial Thermostat
W7750 Constant Volume Air Handler Controller
XL15 Building Manager
Rapidzone
Plus Many Other Topics
Prerequisites: A working knowledge of HVAC equipment
Course Length: 24 hours Tuition: $695.00 per student
No Training Scheduled
DX101 - Metasys DX9100
This course is intended
for contractors who currently use or are interested in designing, installing
and programming direct digital controls using Johnson Controls DX9100
programmable Controller. This does not include the use or instruction
on the network supervisory controllers. Course Outline:
DX9100 Hardware wiring
XT9100 Expansion Modules Hardware Basics
Multiple programming labs using the various control modules
Using PLC control
Review of DT9100 display and commissioning
We will provide laptop computers for the class.
Prerequisites: A good understanding of HVAC control applications and
Windows based programs.
Course Length: 16 hours
Tuition: $425.00 per student
Register
BELIMO101 - Actuator and Control Valves
This1-day workshop is
designed to provide valuable hands-on training and instruction to those
working with Belimo actuators and valves. In addition to hands-on
mounting and wiring lab, participants will learn how to size air dampers and
control valves and will be provided with valuable troubleshooting tips and
advice. Equipment, tools and training materials will be provided
during this class; all you need to do is show up! Topics:
Hands-on actuator mounting and wiring lab
Air damper actuator sizing
Spring and non-spring return air damper actuator
Actuator control nomenclature
Introduction to Belimo Multi Function Technology (MFT)
2 & 3 way valve
Valve sizing formulas
Valve characteristics and limitations
Valve types
NV and SY control valve actuators
We will provide laptop computers for the class.
Prerequisites: None
Course Length: 8 hours
Tuition: $95.00 per student
No Training Scheduled
VLV106 - Valve Damper Selection
This class is intended
for the design or field technician who specifies, selects or services valve
and damper components.
Students will gain knowledge on:
Valve types and piping schemes
Valve sizing labs
Matching correct valve applications
Valve construction and components
Damper options and selections
Damper sizing
Prerequisites: None
Course Length: 4 hours
Tuition: $95.00 per student
No Training Scheduled
HONVFD - Honeywell VFD Certification Training Class
The course is designed
to provide you with the knowledge and skills to perform certified checkout
and startup of Honeywell VFD's. Laptop computers are optional.
Topics will include
VFD market overview
Product overview
VFD selection
VFD application
MMI Keypad
Drive Software
Commissioning
Application practice
Competitive comparison
Prerequisites: None Course Length: 7 hours Tuition: $100.00
per student
No Training Scheduled
Honeywell Webvision
Webvision is a web-based
building manager device that allows contractors and facility managers to
configure, view and command HVAC controllers installed in their sites. It
communicates over the LonWorks network to perform building management
control of various devices and controllers through web browser without the
need for proprietary software. In this hands-on class, students will
participate and learn to:
Discover unitary controllers connected to Webvision
Configure controllers using configuration wizards
Configuration, setup, and routing of alarms
Setup, configure and display trends on point
Create and assign schedules
Review Demand Limit Control (DLC)
Manage access to information through user privilege setup
***Note: Webvision is available only to contractors participating in
the Honeywell CAC program. Please ask a customer representative for
details.
Prerequisites: None Course Length: 24 hours Tuition: $695.00 per
student
Register |
